麂皮绒羊羔绒摇粒绒面料复合机 贴合机详细介绍

如果还在担心机器的质量？我们每年生产销售几百台的机器设备、不到1％的维修率给您信心！

如果还在担心机器的性能？我们全部***电子配件承诺、独特的麂皮绒羊羔绒复合机防护技术给您保障！

如果还在担心机器的售后服务？我们每款机器出厂前必须要经过您的试样才能够出厂 ！我们的售后承诺：一年保修，终身维护，定期提示保养

如果还在犹豫机器的价格？那么我希望您可以明白“一分钱一分货”的真理。低端配置复合机不仅不耐用，而且在复合机方面也没有保障！

复合机价格区间由经济型到智能型5-40万不等。总有一款适合您用的复合机械。全心全意为您量身订制，打造出为您创造财富的不同档次的机器。

麂皮绒羊羔绒复合机

特点：

1、整机在常规的胶点复合机的基础上升级了自动纠偏、自动对中、自动开幅、自动吹废料边等功能。使复合的材料更具有涂胶均匀、复合平整、无拉伸变形、不起泡、不起皱、柔软、透气性佳、收卷整齐等优点。

2、复合材料品种多，尤其适用于面料与面料、面料与双面或四面弹力型针织布、无纺布与皮革、海绵与绒布、海绵与皮革等材料的涂布复合；

3、收、放卷可根据不同的材料，来选择适合的配置；

4、根据不同材料的特性，可增减部分装置；

5、适用于水溶性和溶剂型胶涂布复合，实现一机多用的功能。

6、涂胶量与涂胶样式可根据材料及实际需要调整。

7、滚筒加热可采用电、蒸气或导热油的方式来进行加热。

8、机器辊面幅宽可根据实际材料的大幅宽来特定。

复合机操作调试技术中如何避免成品产生气泡?鑫利龙专业生产火焰复合机、油胶复合机、PUR热熔胶复合机、水胶复合机等，下面跟着江苏鑫利龙智能机械有限公司一起来了解一下吧!

　　提高胶黏剂的浓度或选用湿润性好的胶黏剂太稀或湿润性差的胶黏剂容易流淌，使基材上胶不均匀，从而易出现纵向或横向流水纹。上胶量少的部分很可能出现气泡。可以通过提高胶黏剂的浓度或是选用湿润性好的胶黏剂来减少气泡的产生。基材电晕处理，有些塑料薄膜基材表面黏附胶黏剂的能力差，为了提高这类基材表面的黏附能力，***涂布质量，要求基材的表面张力要达到42～56mN/cm左右。可以在涂布前增加一套电晕处理器对基材表面进行电晕处理，使表面起毛，以达到增强表面表面张力的作用，这样就能提高基材表面的涂胶量以避免气泡产生。

　　复合机操作人员要由经过严格培训，传动部分要设立保护装置，机器一定要接地线，要具有良好的绝缘，并且在保护面板中操作。由于粘结是由胶分子和空气中水分反应形成稳定粘结的固态结构，如果复合机机在空气流动快速的环境下操作，胶就会容易快速冷却凝结，从而影响胶流量喷头组合，产生拉丝现象。因此，复合机机要在快速流通的环境下操作。

　　正确安装与调节刮刀在涂布时，涂胶量的大小主要取决于网纹辊网穴的深浅，网穴越深涂胶量越多，水胶复合机网穴越浅涂胶量越少。正确调节刮刀可以***上胶量更加均匀，从而减少或避免气泡出现。涂布时，如果刮刀作用在网纹辊上的压力过小，在有杂质混入时，就容易将刮刀顶起来形成缝隙，使涂布不均匀。由于网纹辊表面是不平滑的，如果刮刀安装的角度过大，在它高速运转时，弹性刮刀片容易发生震动或跳动，使胶液弹起来爱色丽，引起涂布量差异增大。一般刮刀与网纹辊接触点的径向夹角选择在15～30°之间。

Characteristic:

1. The whole machine upgraded the functions of automatic deviation rectification, automatic alignment, automatic opening and automatic scrap blowing on the basis of conventional compound machine. The composite material has the advantages of uniform glue coating, smooth composite, no stretching deformation, no foaming, no wrinkle, soft, good air permeability, neat winding and so on.

2. There are many kinds of composite materials, especially suitable for coating and compounding of fabrics and fabrics, fabrics and double-sided or four-sided elastic knitted fabrics, non-woven fabrics and leather, sponge and flannel, sponge and leather, etc.

3. Receiving and unwinding can choose suitable configuration according to different materials.

4. According to the characteristics of different materials, some devices can be added or reduced.

5. It is suitable for water-soluble and solvent-based adhesive coating and compounding to realize multi-purpose function of one machine.

6. The amount and style of coating can be adjusted according to material and actual needs.

7. The drum can be heated by electricity, steam or heat conducting oil.

8. Machine roll width can be specified according to the actual material width.

How to avoid air bubbles in compound machine operation and debugging technology? Xin Lilong specializes in producing flame compound machine, oil glue compound machine, PUR hot melt glue compound machine, water glue compound machine and so on. Let&＃39;s follow Jiangsu Xin Lilong Intelligent Machinery Co., Ltd.

Increasing the concentration of adhesives or choosing adhesives with good wettability which are too thin or poor wettability are easy to flow, so that the adhesives on the base material are not uniform, so that the longitudinal or transverse flow lines are easy to appear. Bubbles are likely to appear in the part with less glue loading. Bubbles can be reduced by increasing the concentration of adhesives or by choosing adhesives with good wettability. In corona treatment of substrates, some plastic film substrates have poor adhesiveness to adhesives. In order to improve the adhesiveness of these substrates and ensure the quality of coating, the surface tension of substrates should reach about 42-56 mN/cm. Before coating, a set of corona processor can be added to corona treatment of the substrate surface to make the surface fuzz, so as to enhance the surface tension, so as to increase the amount of glue coating on the substrate surface to avoid bubbles.

The operator of the compound machine should be trained strictly, the transmission part should be equipped with protective device, the machine must be grounded wire, have good insulation, and operate in the protective panel. Because bonding is a solid structure formed by the reaction of glue molecule and water in air, if the compound machine operates in a fast air flow environment, the glue will be easily cooled and solidified quickly, which will affect the combination of glue flow nozzles and lead to wire drawing. Therefore, the compound machine should operate in a fast circulation environment.

When properly installing and adjusting the scraper in coating, the amount of glue coating mainly depends on the depth of the mesh hole of the mesh roller. The deeper the mesh hole, the more the glue coating amount, the less the glue coating amount of the shallow mesh hole of the hydro-glue compound machine. Correct adjustment of the scraper can ensure more uniform glue loading, thereby reducing or avoiding the appearance of bubbles. When coating, if the pressure of the scraper acting on the mesh roller is too small, when impurities are mixed in, it is easy to Jack the scraper up to form a gap, so that the coating is not uniform. Because the surface of mesh roller is not smooth, if the angle of scraper installation is too large, the elastic scraper blade is prone to vibrate or jump when it runs at high speed, which makes the glue springing up Aiseli and causes the difference of coating amount to increase. Generally, the radial angle between scraper and mesh roller contact point is between 15 and 30 degrees.