牛皮纸不干胶复合机 桥架式详细介绍

江苏鑫利龙智能机械有限公司主营产品热熔胶油胶两用复合机、pur热熔胶复合机、不干胶复合机、砂纸复合机、撒粉复合机、水胶复合机、油胶复合机、火焰复合机、智能裁断机、全自动裁断机、液压裁断机等系列产品，广泛应用于地板、地毯、 拼图、木业、吸塑、包装、聚氨酯、日用家纺、鞋帽包袋、服装玩具、体育用品(球类）、磨料磨具(砂纸)、医疗用品、空调冰箱密封件、汽车内饰件、印刷不干胶等行业，***国内。公司以优质的质量，具有竞争力的 价格，完善的售后服务体系，力求使广大客户满意，竭诚欢迎海内外客商，朋友指导工作，共创事业辉煌。

离型纸不干胶复合机

设备特点：
不干胶复合机采用水性或油性作粘合剂，经地高温烘箱的烘干硫化，具有较强的粘合力，与其它材料贴合，即撕即用，方便快捷。
烘箱箱体都设有保温层，加热系统具有自动控温性能，可以有效节约能源，降低生产成本。
客户可以根据需要选配直流电机或变频器联动，从而使机器具有更好的操控性。

操作要求：

操作者只有在完全熟悉，掌握机器的性能，工作原理后方可操作本设备。本设备必须有专人操作，非操作人员不能乱开，乱动。

生产前应检查电缆、断路器、接触器、电机等电器是否符合要求。

生产前须检查三相电源是否均衡，严禁缺相启动设备。

生产期应检查各旋转接头是否安全，管路是否畅通，有无破损，漏油，并及时排除。

生产前须将热油机打开，待温度升至工艺要求温度后，方可生产。生产前应检查各气压表压力是否正常，气路有无漏气，并及时修复.

设备大批量生产前，应先做小量试验，成功后方可大批生产。

生产前，应检查各液压站、减速机、轴承瓦盒、丝杠等润滑情况，应正确及时的加注液压油和润滑油。

停机后，必须及时清洗胶槽及刮胶附件，网纹辊，清除机器各部分残胶及污垢，以备下次使用。

Operational requirements:

Operators can operate the equipment only after they are fully familiar with the performance and working principle of the machine. The equipment must be operated by a special person, and non-operator can not be disorderly opened and disturbed.

Before production, electrical appliances such as cables, circuit breakers, contactors and motors should be inspected to meet the requirements.

Before production, it is necessary to check whether the three-phase power supply is balanced or not, and startup equipment without phase is strictly prohibited.

During the production period, it should check whether the rotary joints are safe, whether the pipeline is smooth, whether there is any damage, oil leakage, and timely removal.

The hot oil engine must be turned on before production, and can be produced only after the temperature is raised to the required temperature of the process. Before production, check whether the pressure of each barometer is normal, whether there is air leakage in the air passage, and repair it in time.

Before large-scale production of equipment, small-scale test should be done before large-scale production can be achieved.

Before production, the lubrication conditions of hydraulic stations, reducers, bearing bushes, screw, etc. should be checked, and the hydraulic oil and lubricating oil should be injected correctly and timely.

After shutdown, the rubber trough and scraper accessories, mesh rollers must be cleaned in time to remove residual glue and dirt from all parts of the machine for next use.